PCI1-8233 Discontinued?
What do I use instead? Can I use any PoE network card? Any tricks involved in getting it to work with MAX?
View ArticleNeed help with changing the Region of Interest (ROI) in Labview for FLIR...
I'm working with a FLIR camera in LabVIEW and having trouble changing the width and height of the area of interest. I was able to do this with NI-MAX, but for some reason, I can't seem to do it in...
View ArticleClik here to view.
Strange deviations of the intensities with IMAQ Flat Field Correction VI
Observed strange behavior (intensities deviations) with NI IMAQ Flat Field Correction VI.As stated here the corrected image computed as:Let proof this with simple VI:First test just with constants: The...
View ArticleIMAQdx in Python only grabs a portion of the frame
Hello, I am using IMAQdx through Python and am experiencing an issue with the raw image frames. Both snap() and grab() seem to only capture a portion of the image. I've attached a images taken using...
View ArticleUsing an Intel network card instead of NI PCIE 8233 Vision Frame Grabber
If the NI PCIE 8233 Vision Frame Grabber goes wrong, can I use a "basic" Intel network card with the right driver (NI GigE Vision Adapter driver) instead? If I know well this PCIE card is just a NIC...
View Articlecolor camera link formats ( using pcie-1427)
Hi,We have used CL for a long time with 14 and 16 bit monochrome, looking at colorizing the output of a monochrome camera, but we are trying to figure out the CL format. We have not found a good...
View ArticleVision Builder 2020 downgrade
Hello folks!I've recently installed NI VBAI 2020 but realized later on that there's no option to "save as..." any inspection as a 2019 version. Then I'm having trouble trying to deploy these...
View ArticleDatamatrix GS1 problems with FNC1
Hi,First post in the forum.We are trying to read Datamatrix GS1 in Vision Assistant.We can see the expected results inside Vision Assistant. It means with special characters that separate the fields of...
View ArticleChange exposure time Vision builder AI
Hello I'm changing the exposure time to camera using the attributes folder of camera adquisition. But the values I changed don't remain in camera after a PC restart. How can I force from vision...
View Articlepcie-1427 time out error
seasoned user of 1427 frame grabber. Using a new CL camera that is 1280x720 resolution. Manufacturer says it has a front porch of 140, Hsync pulse of 40 and back porch of 220 and Vsync of 25. They...
View ArticleIssue/Error Message when Calling LabVIEW VI in Vision Builder
I was running LabVIEW 2015 SP1 and Vision Builder 2015, and I was trying to call a LabVIEW VI in Vision Builder. However, I got the error message that others have gotten, "The VI is broken or one of...
View ArticleWorking with Phantom HS video .CINE files
Does anyone have some experience or example code for working with .CINE video files (produced by AMETEK Phantom cameras) in Labview? I'm aware that the camera vendor has a Labview software toolkit;...
View ArticleClik here to view.
Find the Circle
Hi Sir, Why not able to find the circle, but also did not report any error ?Thanks.
View ArticlePattern Highlight
Hello All, I am working on a program (attached image 6) to highlight all dot peen holes in black color with everything rest as white background. Attached image 2 shows all the holes highlighted in red...
View ArticleSynchronizing video with electrical signal acquisition
Acquiring a video synchronously with an electrical signal is less trivial than one might think:I would like to correlate events visible in the video (100 frames per second; FLIR/Teledyne machine vision...
View ArticleRunning Multiple Vision Builder Inspections Simultaneously from Command Prompt
Dear All,Is it possible to start running multiple VBAI inspections in parallel using command prompt? I know it's possible by just clicking on the vbai files. If so, what's the correct command to do...
View ArticleExact Pattern Search
Hello All, I have a pattern matching program and I tried using the program to find a specific pattern in an image but it does not work because the background does not match. What I mean by that is, I...
View ArticleHoles Search
Hello All, I have a pattern matching program that locates exact pattern in an image if a template image is taken from that original image. But since I am working on a project that will deal with dot...
View ArticleControlling an Advanced Illumination DCS Lighting Controller
I need to communicate with a DCS 100E lighting controller and I'd like to do that with LabVIEW. AI only list C# SDKs on their website, so before I start trying to figure this out from scratch I figured...
View ArticleClik here to view.