webcam locks up
I have a 4K camera that is plug and play, no drivers to install.It looks ok using the Win 10 camera app.At one point, I was able to get some images in NI-MAX.But something goes screwy, not sure what...
View ArticleIMAQ image indicator is black now
We've been running a version of a machine-vision/control software since 2012, with the latest revision being LabVIEW 2018 released a year ago. It uses two analog cameras and some digital IO, and the...
View ArticleSemi-Global Block Matching parameters
Hello, I am using IMAQ Stereo Correspondence (SG Block Matching) VI function and I am trying to adjust the parameters (Postfilter Options, Filter Cap and Correspondence Options). I was able to find...
View Articleaccessing cameralink camera from PCIe1473r - one specific camera not accessible
I'm running Windows 10, LabVIEW 2020.0.1 along with most recent NI-IMAQ, RIO, and FPGA drivers/modules. I have a PCIe-1473r framegrabber and a Basler acA2000-340kc camera. We're using variations on the...
View ArticleCorrupted VBAI inspection File
Hi All,I am hoping someone can help. I saved an inspection routine that had a couple of settings tweaked and rebooted the IPC once everything had closed.Upon trying to open the the project it keeps...
View ArticleimaqBCGLookup
Hi, What kind of formula does imaqBCGLookup perform brightness conversion?I assume it's y = 255*((tan(contrast)(x-128) + brightness)/255)^gamma.Is it right?
View ArticleError 0xBFF6901B timeout using JAI GO-5101 camera with MAX
Having a LV 2018 project and was trying to change the old firewire camera to a GigE, a JAI's GO-5101. Using a standard Intel network card (not MPro1000), I was struggling to make it works in MAX while...
View ArticleHow to grab images quickly from PCI-1410 3 channels
Hi, I have three 8-bit cameras connected to a PCI-1410 with Labview 8.5. I want to quickly grab one image from each of 3 channels. Currently I must stop the session and re-init with the new channel...
View ArticlePCIe 8244 installation
I bought PCIe 8244 whose installation required -Renesas μPD720202 driver software, which is claimed in manual included in separate driver DVD shipped with the device but not found in my supply. It...
View ArticleRaspberry Pi NoIR camera low framerate
Hope this is in the right place. I am trying to use a raspberry pi NoIR camera (with a RPi zero running in peripheral mode) as a USB webcam (as described here). The webcam runs fine and at 30fps if i...
View ArticleClik here to view.
Separate Words acquired after image processing
Hello Everyone. I am doing some work on image processing and I am confused to solve a problem. I am acquiring the following string when it reads "Hello world". But the problem is all the words are...
View ArticleVision aided pick and place robot
Hello all, may I have some insights about how to convert image pixels to real-world coordinates through IMAQ match geometric pattern ? I have difficulties in connecting it with IMAQ convert pixel to...
View ArticleClik here to view.
Camera Attributes keep resetting
I have a Blackfly S USB3 Camera. When I plug it in MAX defaults to Mono8. I change to Mono16 and save but when I open it the next day it's back to Mono8. I decided to set up my camera attributes in...
View ArticleReceive UDP Video Stream with Vision
Hello,I am trying to interface with Vision a camera that uses UDP protocol to send its video stream but I am having trouble detecting the camera.I have tried to specify the address and port that the...
View ArticleClik here to view.
OpenVINO and Vision Development Module 2020 SP2
Dear colleagues, Just upgraded to VDM 2020SP2 released few days ago and found that the OpenVINO seems to be not working properly any longer.Pretty sure that I have seen OpenVINO working before (at...
View ArticleSyntax Error on Vision Builder AI 2020
Hi all, I've been creating inspections on Vision Builder Automated Inspection 2019 when I came to a syntax error. It went away when I installed the newer version, VBAI 2020. I now get the same error...
View ArticleVBAI User Interface
Hello, I developed a VBAI code but had a hard time switching it to the user interface. Can VBAI generate some stand along with UI so we can put that on a touch screen to operate in some industry...
View ArticleClik here to view.
FLIR IR Camera A655sc Greyscale to Temperature Conversion
Hey Community,I am looking for a little bit of help from your side, because the support of FLIR is a little bit disappointing, to state it mildly. We have a FLIR A655sc camera that I can read out...
View ArticleGigE Vision camera JPEG compression
Good afternoon, I have a Optomotive Velociraptor camera and i am having problems to reach high fps rates because after activate JPEG compression the camera don't deliver images. I already activated...
View ArticleClik here to view.
vison info from external window
I have the information of the external window only in this popup screen.But I want to use the numbers in the program myself.Any suggestions are welcome. Thanks Paul
View Article